HE351W w/12cm Turbo

Genuine Holset

• T3 flange
• Comp wheel is 58mm 7 blade
• Turbine wheel is 60/69
• 60lb/min & can support up to approx 400hp
• 12cm Waste Gated Turbine Housing
• Same exhaust v-band outlet & comp out as stock H1C or early 1994-98.5 HX35
• You will need to clock (index the compressor housing & centre section to line up with your year of IC piping…this requires loosening the centre section bolts, actuator bolts etc and retightening once lined up….actuator will no longer tight against the exhaust housing at upper bolts and will be touching the compressor housing but we have run this configuration for many years and it is a non issue when using blue loctite on actuator bolts) before tightening back up.

NOTE:  No core charge needed

6 month, limited warranty by Holset. Any warranty issues are the customers responsibility to deal with ( shipping etc ).