Menu

DIESELTUFF

The Hammer Down Diesel Store

0
SKU: Velocity 921-2

Throttle Sensitivity Controller

Throttle Sensitivity Controller 921-2

$209.99 USD

Description

Throttle Sensitivity Controller by Velocity Performance Product

# 921-2

The Velocity Performance Products TSC (Throttle Sensitivity Controller) removes factory preprogramed delays on your electronic accelerator pedal and allows your engine to respond faster to pedal movement. Resulting in a much faster acceleration!

The Velocity Performance Products Throttle Sensitivity Controller has 5 user settings. Stock, Mild, Medium, High and Extreme. Extremely simple and fast installation makes the Velocity Performance Products TSC the only way to feel the true horsepower of your ride without voiding warranty or tampering with emission controls!

Years of research, development and testing has led to this exciting product at a very affordable price!

Simple to install.

12 month warranty

See video

Install Instructions

  • Make sure ignition is turned off for at least 10 minutes before installing.
  • Locate accelerator pedal electrical connector and disconnect.
  • Plug corresponding connectors into respective plugs.
  • Tie wrap the cables out of the way.
  • Determine a good location for TSC Controller placement where it will be easily accessible.
  • Mount using the supplied 3M Velcro 2 sided tape
  • Turn on ignition the Power Level LEDs will be in pre calibration mode (chasing)
    VERY IMPORTANT PART READ CAREFULLY AND UNDERSTAND BEFORE PROCEEDING
    PUSH AND HOLD BOTH THE UP AND DOWN BUTTONS BEFORE PRESSING ON THE ACCELERATOR PEDAL THEN WHILE BUTTONS ARE PRESSED PUSH THE ACCELERATOR TO THE FLOOR
    RELEASE THE 2 BUTTONS WHILE THE ACCELERATOR IS STILL TO THE FLOOR
    AFTER YOU RELEASE THE BUTTONS YOU CAN REMOVE YOUR FOOT FROM THE PEDAL
  • Only the first LED should be illuminated at this time.
  • Start vehicle, and you are done

 

 

Brand

Velocity Performance Products